anw

ANGELWING
Boost+ Active Splitter

The "ANGELWING - boost+ active splitter" (ANW) is a signal booster pedal that splits the input signal into three separate outputs.

The “ANW” boosts the input signal as cleanly as possible across all three outputs. The high available output level being enough to push the next effect in the chain or an amplifier into a very natural sounding overdrive.

The input signal is split into three active outputs, each with their own level control.

		From the left top; "LEVEL MAIN", "LEVEL A", "LEVEL B", and "GAIN" below.
		On the right side, there is an INPUT jack. On the left side from the top, there are jacks for an AC ADAPTER, OUT A, OUT MAIN and OUT B.
		When the effect is engaged, the sound is output from the three jacks. The gain of all outputs is controlled with GAIN, and the volume of each is adjusted with LEVEL MAIN, LEVEL A, and LEVEL B. When the effect is off, only OUT MAIN remains active, OUT A and OUT B are both muted.
		Because it is active, it can split the input signal without reducing gain or volume. It can also be used as an AB box.

SIZE	L:70mm W:115mm H:55mm
WEIGHT	280g
JACKS	INPUT, MAIN OUTPUT, OUTPUT A, OUTPUT B
SWITCHES	ON/OFF
CONTROLS	LEVEL MAIN, LEVEL A, LEVEL B, GAIN
POWER	BATTERY 006P or AC adapter (DC9V "barrel" type tip negative)

The specification may be changed without further notice.